Adding thresholds
The Management application allows you to create Invalid CRCs, Invalid words, Link, Link Reset,
Protocol Error, Security, and Sync Loss thresholds.
Adding a C3 Discard Frames threshold
NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
To add an C3 Discard Frames threshold, complete the following steps.
1. Select Configure > Port Fencing.
2. Select C3 Discard Frames (Fabric OS only) from the Violation Type list.
3. Click Add.
DCFM Enterprise User Manual
53-1001775-01
The Port Fencing dialog box displays
FIGURE 124
Port Fencing dialog box
The Add C3 Discard Frames Threshold dialog box displays.
FIGURE 125
Add C3 Discard Frames Threshold dialog box
(Figure
124).
13
Adding thresholds
329