To remove the specified static MAC address from the table, click the D
MAC address as shown in
To search for a MAC address to see if it exists in the table or not, enter the MAC
and VID, then click on L
ADDRESS
table, whether it is a static or a dynamic MAC address, the result will be displayed.
To show all of MAC address in the L2 table, click the SHOW link next to S
A
.
DDRESSES
Figure 6-17. L2 Management: Current Entries Screen
Chapter 6: 1-Gb Ethernet Switch Firmware
Figure 6-16. L2 Management Screen
Figure 6-17
when there are static entries in the table.
button. If the MAC address is in L2
OOKUP
19
link for that
ELETE
ADDRESS
L2
HOW