Interface Configuration - Supermicro SSE-G24-TG4 User Manual

Interface Configuration

Figure 5-147. IGMP Snooping Interface Configuration Page
Clicking the
INTERFACE
C
ONFIGURATION
parameters. The parameters for this page are shown in
Table 5-125. IGMP Snooping Interface Configuration Page Parameters
Parameter
VLAN ID
IGMP Snooping
Status
Operating Version
Fast Leave
Querier Status
Querier Interval
(secs)
Router Port List
Current Version
C
ONFIGURATION
page (Figure 5-147), which configures IGMP snooping interface specific
Description
This parameter specifies the VLAN ID for which the configuration is to be
performed.
This parameter specifies the status of IGMP snooping in the Switch, which can
be enabled or disabled for a specific VLAN.
This parameter specifies the operating version of the IGMP snooping switch for a
specific VLAN. Options are version 1 or version 2 or version 3.
This parameter indicates whether the fast leave processing for a specific VLAN,
is to be enabled or disabled.
This parameter specifies whether the IGMP snooping switch is enabled or
disabled as a querier for a specific VLAN. The value ranges between 60 and
600.
This parameter specifies the time period for which general queries are sent by
the IGMP snooping switch, when configured as querier on a VLAN.
This parameter specifies the router port list for a specific VLAN.
This parameter specifies the working IGMP Version on the given VLAN.
Chapter 5: Web Based Management Utility
tab brings up the IGMP S
Table
5-173
I
NOOPING NTERFACE
5-125.