Left Side Tree; Middle Configuration Link Table - Supermicro SSE-G24-TG4 User Manual

• For the SSE-G24-TG4 switch, it displays twenty four Gigabit Ehternet (Gi) ports and
four 10-Gigabit Ethernet (EX-Extreme Ethernet) ports.
• For the SSE-G48-TG4 switch, it displays forty eight Gi ports and four Ex ports.
Note that Ex ports configured as stacking ports will not be displayed.
In stacking, the Switch Identifier will be displayed on top of this LED display. This
allows you to select a stack member switch of interest, and to view the LED display for
the corresponding switch.
For Link, a green light corresponding to a number indicates that that numbered port is
up, whereas a red light corresponding to a number indicates that this port is down.

Left Side Tree

The tree display on the left side of the page provides quick access to the configuration
pages. This tree is organized based on the features supported in the switch. The main
features are categorized in the following groups.
• System Management - System based configurations
• Layer 2 Management - Layer 2 Protocols including VLAN, RSTP, MSTP, ...
• Layer 3 Management - Layer 3 Protocols including - IP, RIP, OSPF, ....
• Multicast Management - Multicast Protocols including IGMP, PIM, ...
• Statistics - Statistics and Counters for all the features.
This tree is displayed on the left navigation pane on all configuration pages. This makes
it easier for you to choose any configuration page directly without going back to the
home page every time. To go to one of a M
symbol to expand the list.

Middle Configuration Link Table

This section of the page displays a table of links to all major configurations. This table
provides links similar to the Left Side Tree links. The configuration links are categorized
based on features of the switch.
Chapter 5: Web Based Management Utility
page's sub-pages, click on the
ANAGEMENT
5-7