Setting/Checking The Internal Clock; Setting/Checking The Date - Agilent Technologies 4294A Operating Manual

Setting/Checking the Internal Clock

The Agilent 4294A has a built-in clock that maintains the current date and time. This
internal clock is used for time stamps when outputting to a printer (printing the date and
time), for recording the date and time when saving internal data or HP Instrument BASIC
programs to a file, and for other functions requiring date/time recording. Follow these steps
to set/check the internal clock's date, date display format, and time.

Setting/Checking the Date

Step 1. Press the
Step 2. Press the
Step 3. Press the
format (pressing the key toggles your selection).
Softkey label
DATE MODE [MM/DD/YY]
DATE MODE [DD/MM/YY]
NOTE The date display format specified here is not applied to the dates in the file list displayed on
the HP Instrument BASIC screen when the CAT command is executed.
Step 4. Press the
Step 5. Press the
number indicating the currently set month is displayed. Below it, the currently set date
(year, month, and day) is displayed in a smaller size with the date mode set in Step 3.
NOTE When you press the
value field as when the
press the
"month" setting after executing Steps 7 through 10.
Step 6. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the "month."
• Enter the desired value with the numeric keys (
key.
• Turn the rotary knob (
• Press the step keys ([­][¯]) to set the desired value.
"Month" can be set by an integer ranging from 1 through 12.
Chapter 9
Setting/Using Control and Management Functions
key to display the System menu.
[System]
key to display the Internal Clock menu.
CLOCK
key to select the date mode, which determines the date's display
DATE MODE [ ]
key to display the Date Configuration menu.
DATE
key. In the set parameter value field in the upper left area of the screen, a
MONTH
key in Step 4, the same display appears in the set parameter
DATE
key is pressed. Therefore, you do not actually need to
MONTH
key here. You use the
MONTH
m m m m ) until the desired value is set.
Setting/Checking the Internal Clock
Date mode
Selects "2-digit number for month/2-digit
number for day/4-digit number for year" as the
date display format.
Selects "2-digit number for day/2-digit number
for month/4-digit number for year" as the date
display format.
key when you want to change the
MONTH
to ) and then press the
[0] [9]
unit
[´1]
301