Agilent Technologies 4294A Operating Manual page 415

Table B-78 IBASIC edit (Editor) menu
Key operation: [System] - IBASIC - Edit
Softkey
OUTPUT @Hp4294 Inserts OUTPUT @Hp4294 TO 800 at the current cursor position.
ENTER @Hp4294 Inserts ASSIGN @Hp4294 TO 800 at the current cursor position.
END Inserts END at the current cursor position.
GOTO LINE Enters ENTER LINE NUMBER/LABEL? in the HP Instrument BASIC command
line. From here, use the external keyboard to enter a line number or its defined
label name and press the [Enter] key. The cursor moves to the specified line.
RECALL LINE Restores the line last deleted.
done Exits the program edit mode and returns to Table B-75, "HP Instrument BASIC
(IBASIC) menu (1/3)," on page 404. The display mode specified in Table B-21,
"Display allocation (Disp Alloc) menu," on page 369 is restored on the screen.
Table B-79 IBASIC mass storage (Mass Storage) menu
Key operation: [System] - IBASIC - more 1/3 - MASS STORE [ ]
Softkey
FLOPPY
Selects the flexible disk drive as the HP Instrument BASIC mass storage
|
MEMORY
Selects the volatile memory disk as the HP Instrument BASIC mass storage
|
FLASH MEMORY Selects the nonvolatile memory disk (flash memory) as the HP Instrument
BASIC mass storage
CHANGE DIRECTORY
Enters MSI "[ in the HP Instrument BASIC command line
entry cursor is located below the second ". From here, use the external keyboard
to enter a directory name and press the [Enter] key. The current directory
changes to the specified directory.
return Returns to Table B-76, "HP Instrument BASIC (IBASIC) menu (2/3)," on page
405.
1. The selection of the mass storage device is set independently in each of the following menus: this menu, Table B-81, "Mass stor-
age (Store Device) menu," on page 408, and Table B-115, "Copy destination device (Dest Device) menu," on page 425. How-
ever, there is only a single set of mass storage devices for all menu selections.
2. Before displaying the result in the command line, you must select the BASIC STATUS key, HALF INSTR HALF BASIC key, or
ALL BASIC key in Table B-21, "Display allocation (Disp Alloc) menu," on page 369. MSI is the abbreviation of MASS
STRAGE IS.
Table B-80 IBASIC command name (Command Name) menu
Key operation: [System] - IBASIC - more 1/3 - more 2/3 - COMMAND ENTRY
Softkey
SELECT LETTER Selects a character indicated by "­" on the screen and enters it.
SPACE Enters a space.
BACK SPACE Deletes the character last entered.
Appendix B
Softkeys displayed by pressing the [System] key
Function
Function
1
.
Function
Key Definitions
GPIB command
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
GPIB command
1 (N/A)
.
(N/A)
1
.
(N/A)
(N/A)
2
. The character
(N/A)
GPIB command
(N/A)
(N/A)
(N/A)
407