Softkeys Displayed By Pressing The [Meas] Key - Agilent Technologies 4294A Operating Manual

Softkeys displayed by pressing the
Table B-7 Measurement parameter (Measurement) menu (1/3)
Key operation: [Meas]
Softkey
|Z| - q
Selects impedance absolute value and impedance phase as measurement
| parameters. The 1st parameter on the softkey label (in this case, |Z|) is assigned
to trace A; the 2nd parameter (in this case, q), to trace B. (This system of trace
assignent is applicable to other measurement parameters.)
R - X Selects series resistance and reactance as measurement parameters.
|
Ls - Rs Selects series inductance and series resistance as measurement parameters.
|
Ls - Q Selects series inductance and Q factor (quality factor) as measurement
| parameters.
Cs - Rs Selects series capacitance and series resistance as measurement parameters.
|
Cs - Q Selects series capacitance and Q factor (quality factor) as measurement
| parameters.
Cs - D Selects series capacitance and dissipation factor as measurement parameters.
more 1/3 Displays Table B-8, "Measurement parameter (Measurement) menu (2/3)," on
page 363.
Table B-8 Measurement parameter (Measurement) menu (2/3)
Key operation: [Meas] - more 1/3
Softkey
|Y| - q Selects admittance absolute value and admittance phase as measurement
| parameters.
G - B Selects conductance and susceptance as measurement parameters.
|
Lp - G Selects parallel inductance and conductance as measurement parameters.
|
Lp - Q Selects parallel inductance and Q factor (quality factor) as measurement
| parameters.
Cp - G Selects parallel capacitance and conductance as measurement parameters.
|
Cp - Q Selects parallel capacitance and Q factor (quality factor) as measurement
| parameters.
Cp - D Selects parallel capacitance and dissipation factor as measurement parameters.
more 2/3 Displays Table B-9, "Measurement parameter (Measurement) menu (3/3)," on
page 364.
Appendix B

Softkeys displayed by pressing the [Meas] key

[Meas]
Function
Function
Key Definitions
key
GPIB command
MEAS IMPH
MEAS IRIM
MEAS LSR
MEAS LSQ
MEAS CSR
MEAS CSQ
MEAS CSD
(N/A)
GPIB command
MEAS AMPH
MEAS ARIM
MEAS LPG
MEAS LPQ
MEAS CPG
MEAS CPQ
MEAS CPD
(N/A)
363