Set The Marker Separately For Either Trace A Or B - Agilent Technologies 4294A Operating Manual

Set the marker separately for either trace A or B

In setting the preset time, marker setting procedures are applied to both traces A and B (for
example, movements of the main marker are common to traces A and B). This is because
the marker coupling function is turned on in the preset time setting. To set the marker
separately for either trace A or B, the following steps must be taken:
Step 1. Press the
Step 2. Press the
label will change to
separately to either trace A or B.
Softkey label
MKR COUPLE ON off
MKR COUPLE on OFF
Figure 8-17 Marker coupling function off
NOTE The marker couple function on/off setting applies to both traces A and B. You need not
select the active trace or confirm your selection before setting.
Chapter 8
Set the marker separately for either trace A or B
key to display the marker menu.
[Marker]
key to turn off the marker coupling function. The softkey
MKR COUPLE ON off
MKR COUPLE on OFF
Analysis and Processing of Result
. Setting of the marker thereafter applies
State of marker coupling function
ON (marker setting applies to both traces A
and B)
OFF (marker setting applies separately to
either trace A or B)
243