Display Functions; Marker Functions - Agilent Technologies 4294A Operating Manual

Specifications and Supplemental Performance Characteristics
Basic Characteristics

Display Functions

Display
Size/Type
Resolution (pixels)
Scale types
X-axis scale
Y-axis scale
Number of traces
Data trace
Memory trace
Split display
Instrument/IBASIC display
selection
Other display functions
Data math functions
1. Complex Z-Y measurements only.
2. Except for Complex Z-Y measurements.

Marker Functions

Marker type and number
Main marker
Sub marker
D marker
Marker search
Search type
Search track
Marker X-axis display
Other functions
344
8.4 inch color LCD (TFT)
640 ´ 480 (VGA)
Linear and log
Linear and log (depending on sweep type)
2 traces (trace A and trace B)
2 traces (trace A and trace B)
Available (trace A: upper half, trace B: lower half)
All instrument, Half instrument and half IBASIC, All
IBASIC, or Instrument and IBASIC status.
Inactive trace off, trace accumulation, phase
expansion
Data - memory, data/memory
One for each trace (A and B).
Seven for each trace (A and B).
One for each trace (A and B).
Maximum, minimum, target, peak, trace bandwidth
analysis
Performs search with each sweep
Sweep parameter value, sweep elapsed time, or
relaxation time (1/2pf)
Marker continuous mode, D marker mode, marker
coupled mode, marker value substitution (marker®),
marker zooming, marker list, marker statistics,
marker signal/dc bias monitor
1 2
, delta% , offset
Chapter 10