Agilent Technologies 4294A Operating Manual page 329

currently selected test item is displayed in the set parameter value field in the upper left
area of the screen.
Step 3. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the test number for the item whose result you want to check.
• Enter the desired value with the numeric keys (
key.
• Turn the rotary knob (
• Press the step keys ([­][¯]) to set the desired value.
The desired test result is displayed at the right of the test number and test item in the set
parameter value field in the upper left area of the screen.
NOTE
The power-on self-test automatically executed at power-on is a partial execution of the
"internal tests." You can also check the result of each test in the power-on self-test by
entering its test number as described above.
Chapter 9
Setting/Using Control and Management Functions
Performing Self-Diagnosis of the Agilent 4294A
to
[0]
m m m m ) until the desired value is set.
) and then press the unit
[9] [´1]
321