Deleting A File Or Directory - Agilent Technologies 4294A Operating Manual

Setting/Using Control and Management Functions
Managing Files
NOTE You can perform Steps 11 and 12 with the external keyboard connected to the rear panel.
After entering the filename, press the
The same extension as that of the copy source is automatically added to the filename of the
copy destination file.

Deleting a File or Directory

Follow these steps to delete a file or directory on a storage device of the Agilent 4294A.
Step 1. To delete a file or directory on a floppy disk, insert it into the floppy disk drive.
Step 2. Press the
Step 3. Press the
Step 4. In [ ] of the
displayed.
Softkey label
STORE DEV [FLOPPY]
STORE DEV [MEMORY]
STORE DEV [FLASH]
To delete a file or directory on the currently selected storage device, proceed to Step 6.
To delete a file or directory on a storage device other than the currently selected one, press
the
Step 5. Select the storage device from which you want to delete a file or directory.
Storage device
Floppy disk drive
Volatile memory disk
Nonvolatile memory disk (flash memory)
Pressing one of the above keys returns the display to the File Utilities menu.
Step 6. Press the
Step 7. Use the following softkeys to display the file or directory you want to delete as a softkey
label.
Function
Displays the previous page of the file/directory
list.
Displays the next page of the file/directory list.
310
key to display the Save menu.
[Save]
key to display the File Utilities menu.
FILE UTILITIES
key's softkey label, the currently selected storage device is
STORE DEV [ ]
key to display the Mass Storage menu.
STORE DEV [ ]
key to display the File Selection menu.
PURGE FILE
key on the keyboard to execute the save.
[Enter]
Selected storage device
Floppy disk drive
Volatile memory disk
Nonvolatile memory disk (flash memory)
Key operation
FLOPPY
MEMORY
FLASH MEMORY
Key operation
PREV FILES
NEXT FILES
Chapter 9