Connecting The Bnc Adapter (For Option 1D5 Only) - Agilent Technologies 4294A Operating Manual

Installation

Connecting the BNC Adapter (for Option 1D5 Only)

Connecting the BNC Adapter (for Option 1D5 Only)
When Option 1D5 is installed, connect the BNC cable that comes with this option between
the REF OVEN and EXT REF INPUT connectors on the rear panel of the Agilent 4294A.
Option 1D5 makes the frequency of the Agilent 4294A's test signal both more stable and
more accurate.
Figure 1-3 Connecting the BNC Adapter (for Option 1D5 Only)
Chapter 1 23