Agilent Technologies 4294A Operating Manual page 297

The setting of the storage device you select using
MASS STORE [ ]
Instrument BASIC function, and it is different from the selection of the storage device
using the
Step 7. Press the
of the key label of the
[ ]
Table 8-22
Softkey label
STORE DEV [FLOPPY]
STORE DEV [MEMORY]
STORE DEV [FLASH]
Step 8. Press the
and the file name entry menu also appears.
Step 9. Use the following keys to enter a file name in the string entry line.
Key
Step keys ([­][¯])
Rotary knob (m m m m )
SELECT LETTER
Numeric keys (
SPACE
BACK SPACE
CLEAR NAME
NOTE You do not need to add any extension to the file name.
Step 10. When you finish entering a file name in the string entry line, press the
execute save. To cancel the save, press the
menu .
NOTE
You can use your external keyboard connected to the rear panel for Steps 6 and 7. After
entering a file name, press the
Chapter 8
Save and Recall the Agilent 4294A Internal Data
is applied when using the 4294A's storage devices from the HP
key here. However, the storage devices themselves are common.
STORE DEV [ ]
key to return to the save menu. The selected storage device is displayed in
return
STORE DEV [ ]
key. The file name entry line to save the displayed screen appears
GRAPHICS
or
[G/n]
through , , and )
[0] [9] [.] [-]
or
[Back Space]
[Enter]
Analysis and Processing of Result
[System] - IBASIC - more 1/3 -
key.
Selected storage device
Floppy disk drive
Volatile memory disk
Nonvolatile memory disk (flash memory)
Function
Scrolls the character entry list displayed below
the string entry line.
Moves the cursor (­) below the displayed
character list to right and left.
Enters the character specified with the cursor
(­) below the character list at the position of
the cursor (_) in the string entry line.
Enters a numeric character at the position of
the cursor (_) in the string entry line.
Enters a white space character at the position
of the cursor (_) in the string entry line.
Returns the cursor (_) in the string entry line
one character left and deletes the character at
the position.
Deletes the whole of the string entered in the
string entry line.
key. In either case, you return to the save
cancel
key to execute save.
or key to
done [´1]
289