Recall The Saved File - Agilent Technologies 4294A Operating Manual

Analysis and Processing of Result
Save and Recall the Agilent 4294A Internal Data
device by the
To store the power as a default setting file on a floppy disk, store the file in the nonvolatile
memory (flash memory) once. Then copy it onto the floppy disk by using the file utility
menu displayed by
If the AUTOREC.STA file is present on both the floppy disk and the nonvolatile memory
disk when the power is turned on, only the AUTOREC.STA file of the floppy disk is read.
If you only store the AUTOREC.STA file on the nonvolatile memory disk, the file will not
be read when the power is turned on.

Recall the saved file

You can use the following steps to recall the data stored in the Agilent 4294A storage
device according to "Save the setting state, calibration data and memory array (State
Save)" on page 271 and "Save the calibration data and trace data (Data Save)" on page
273.
Step 1. Press the
displays the Recall menu.
Step 2. Press the
Step 3. Select the storage device that contains the file to be recalled.
Storage device
Floppy disk drive
Volatile memory disk
Non-volatile memory disk (flash memory)
NOTE When using the floppy disk drive, make sure the disk is first inserted in the drive.
The storage device selection using
applicable when using the storage devices of the Agilent
Instrument BASIC function. It is different from the storage device selection using the
STORE DEV [ ]
Step 4. Press the
in the
Softkey label
STORE DEV [FLOPPY]
STORE DEV [MEMORY]
STORE DEV [FLASH]
The first through fourth softkey labels in the Recall menu serve as the file names and the
directory name lists (first four items in alphabetical order when there are four or more files
or directories) read from the selected storage device.
292
key.
STORE DEV [ ]
-
[Save] FILE UTILITIES
key. This reads the pre-selected contents of the storage device and
[Recall]
key to display the Storage Device menu.
STORE DEV [ ]
key. However, the storage devices themselves are the same.
key to return to the Recall menu. The selected storage device is displayed
return
box of the key label of the
[ ]
and key operations.
Key operation
FLOPPY
MEMORY
FLASH MEMORY
[System] - IBASIC - more 1/3 - MASS STORE [ ]
4294A
key.
STORE DEV [ ]
Selected storage device
Floppy disk drive
Volatile memory disk
Non-volatile memory disk (flash memory)
is
through the HP
Chapter 8