Specifications and Supplemental Performance Characteristics
Basic Characteristics
Averaging factor
Adapter Setup
Adapter Selection
NONE
4TP 1M
4TP 2M
7-mm 42942A
PROBE 42941A
Calibration
Calibration
User calibration
Port extension
Fixture compensation
Calibration points
Measurement Accuracy
Accuracy Specifications
Temperature
Four-terminal pair port of
the 4294A's front panel
7-mm port of the
42942A Terminal
Adapter
330
1 to 256 (integer)
No adapter (the 16047E or other direct connection
type test fixture) is connected
Four-terminal pair 1 m (16048G)
Four-terminal pair 2 m (16048H)
Terminal Adapter (42942A)
Impedance Probe (42941A)
Calibration performed with user-defined calibration
kit (OPEN, SHORT, LOAD)
Compensation performed when the measurement
terminal is expanded from the 7-mm connector of the
42942A Terminal Adapter or the 3.5-mm connector
of the 42941A Impedance Probe. Enter electrical
length or delay time for the extension.
Compensation performed at the device contacts of the
test fixture using OPEN, SHORT, LOAD.
Fixed points or user points determined by sweep
setups
23 ± 5°C
Beyond 23 ± 5°C, the measurement accuracy
decreases to half the value described.
Within ± 5°C from the adapter setup temperature.
Measurement accuracy applies when the adapter
setup is performed at 23 ± 5°C. When the adapter
setup is performed beyond 23 ± 5°C, the
measurement accuracy decreases to half the value
described.
Chapter 10