When Using Complex Parameters (Complex Z-Y) - Agilent Technologies 4294A Operating Manual

Setting Up the Display of Measurement Results
Selecting the Graph Axis Format

When Using Complex Parameters (COMPLEX Z-Y)

When the Agilent 4294A is configured to perform a COMPLEX Z-Y measurement
(complex impedance for Trace A, complex admittance for Trace B), use the following
procedure to select the graph axis formats:
Step 1. Activate the trace for which you want to set the axis format.
To activate:
Trace A
Trace B
Step 2. Press the
Step 3. Select the desired graph axis format by pressing the appropriate key:
To select:
Complex plane (where the horizontal and
vertical axes use real and complex values,
respectively)
Polar chart
Figure 7-3 Complex plane whose Y axis indicates complex admittance (with only Trace B
displayed)
162
key to display the Format menu.
[Format]
Press:
[A]
[B]
Press:
COMPLEX
POLAR
Chapter 7