Clearing (Turning Off) The Marker From The Screen; Turning Off The Sub-Markers; Turning Off The Delta Marker - Agilent Technologies 4294A Operating Manual

Clearing (turning off) the marker from the screen

This section describes how to turn off each marker or all markers on the screen.

Turning off the sub-markers

Follow these steps to turn off each sub-marker (markers numbered 1 to 7).
Step 1. Activate the trace displaying the sub-marker you want to turn off.
Active Trace
Trace A
Trace B
Step 2. Press the key to display the Marker menu.
[Marker]
Step 3. Press the
CLEAR SUB MKR
Step 4. Select the number of the sub-marker you want to clear from the following.
Type of sub-marker
Sub-marker 1 (marker number 1)
Sub-marker 2 (marker number 2)
Sub-marker 3 (marker number 3)
Sub-marker 4 (marker number 4)
Sub-marker 5 (marker number 5)
Sub-marker 6 (marker number 6)
Sub-marker 7 (marker number 7)
For a sub-marker that is on, the sweep parameter value and measurement parameter value
(indicating the position of the sub-marker) are displayed to the right of the sub-marker
number of the softkey label ("....." in the above key operation column). When you turn off
the sub-marker, "....." in the above key operation column changes to OFF.

Turning off the delta marker

You can use the following procedure to turn off the delta marker on the screen regardless of
whether the delta marker mode is delta marker mode, fixed delta marker mode, or tracking
delta marker mode.
Step 1. Activate the trace containing the delta marker you want to turn off.
Active Trace
Trace A
Chapter 8
Analysis and Processing of Result
Clearing (turning off) the marker from the screen
Key operation
[A]
[B]
key to display the Sub-Marker Clear menu.
Key operation
1.....
2.....
3.....
4.....
5.....
6.....
7.....
Key operation
[A]
247