Agilent Technologies 4294A Operating Manual page 85

Connecting SHORT (0 W) to the 42942A
Figure 4-6
Step 9. Press the
NOTE When the short data measurement is completed, the softkey label changes to
SHORT [DONE]
Step 10. Remove the SHORT (0 W) standard from the 7-mm port of the 42942A. Then connect the
LOAD (50 W) standard to the 7-mm port (the LOAD standard is furnished with the
42942A Terminal Adapter).
Chapter 4
key to start the short data measurement.
SHORT [-]
.
Preparation of Measurement Accessories
Adapter Setting
77