Using A Rackmount Kit; Option 1Cn Handle Kit - Agilent Technologies 4294A Operating Manual

Installation

Using a Rackmount Kit

Using a Rackmount Kit
If you want to combine the Agilent 4294A with other instruments and a controller to
assemble a comprehensive measuring system, you can use one of the optional
rackmount/handle kits to install it in an efficient way. Figure 1-6 shows how to install the
rackmount kit.
Table 1-2 Rackmount/Handle Kits
Figure 1-6 Installing the Rackmount/Handle Kit

Option 1CN Handle Kit

Option 1CN includes a pair of handles and the parts necessary for attaching the handles to
the Agilent 4294A.
Installing the Handles
Step 1. Remove the adhesive-backed trim strips (1) from the left and right side faces of the front
panel frame (Figure 1-6).
Step 2. Attach the front handles (3) to the side faces with the supplied screws.
26
Option ID
1CN Handle Kit
1CM Rackmount Kit
1CP Rackmount & Handle Kit
Description Agilent part number
5063-9229
5063-9216
5063-9223
Chapter 1