Selecting Accessories For Measurement - Agilent Technologies 4294A Operating Manual

Preparation of Measurement Accessories

Selecting Accessories for Measurement

Selecting Accessories for Measurement
Select the appropriate accessories (test fixture, adapter, probe, cable, etc.) for your
measurement in accordance with Table 4-1. Detailed specifications are described in
catalogs or in the operation manual of each accessory.
Table 4-1 Guidelines for Selecting Accessories
Type of
Device
Entire frequency range of 4294A
Entire frequency range of 4294A
Entire frequency range of 4294A
Entire frequency range of 4294A
Frequency £ 40 MHz
Frequency £ 40 MHz
Frequency £ 13 MHz
Lead
Frequency £ 10 MHz, Balanced
component
component and circuit measurement
Frequency £ 2 MHz, External dc bias
up to 200 V
Frequency £ 100 kHz, Component
terminal diameter £ 15 mm
Frequency £ 100 kHz, Component
terminal diameter £ 7.9 mm
Frequency £ 100 kHz, Component
terminal diameter £ 6 mm
Frequency £ 100 kHz, IC pin
diameter £ 1 mm
Frequency £ 100 kHz
64
Condition
16047E
42942A and 16092A
42942A and 16093A
42942A and 16093B
16047C
16047D
16047A
16314A
16065A
16089A
16089B
16089E
16089C
16089D
Accessory Features of Accessory
Equipped with screws for firmly
fixing the fixture to the 4294A.
For both chip and lead
components.
Two binding-post-type
electrodes set 7 mm apart.
Three binding-post-type
electrodes set 15 mm and
18 mm apart.
For axial and radial lead
components.
For axial and radial lead
components.
Three binding-post-type
electrodes.
For axial and radial lead
components. Equipped with
safety cover.
Two Kelvin clips.
Cable length: approx. 1 m.
Two Kelvin clips.
Cable length: approx. 1 m.
Two Kelvin clips.
Cable length: approx. 1 m.
Two Kelvin clips.
Cable length: approx. 1 m.
Four alligator clips.
Cable length: approx. 1 m.
Chapter 4