Save The Calibration Data And Trace Data (Data Save) - Agilent Technologies 4294A Operating Manual

NOTE
There is no need to attach an extension to the file name.
Step 7. After entering the file name in the character string input line, press the
key to save the file. To suspend saving, press the
NOTE Steps 6 and 7 can be executed from the external keyboard connected to the rear panel.
After entering the file name, press the
extension [.STA] is automatically attached to the name of the file to be saved.

Save the calibration data and trace data (Data Save)

Select the required data from the four data items (data array, memory array, data trace array
and memory trace array) and calibration data (user calibration data and fixture
compensation data) and save them into the storage device as one file.
Step 1. Press the
Step 2. Press the
Step 3. Select the Agilent 4294A storage device.
Storage device
Floppy disk drive
Volatile memory disk
Non-volatile memory disk (flash memory)
NOTE When using the floppy disk drive, make sure a disk is first inserted in the drive. If the
floppy disk is set to "Write Protect," the data cannot be saved. Set the disk to "Write
Enable" before using it.
The storage device selection using
applicable when using the storage devices of the Agilent 4294A through the HP Instrument
BASIC function. It is different from the storage device selection using the
key. However, the storage devices themselves are the same.
Step 4. Press the
the
[ ]
Softkey label
STORE DEV [FLOPPY]
STORE DEV [MEMORY]
STORE DEV [FLASH]
Step 5. Press the
Step 6. Press the
Chapter 8
Save and Recall the Agilent 4294A Internal Data
key to display the Save menu.
[Save]
key to display the Storage Device menu.
STORE DEV [ ]
[System] - IBASIC - more 1/3 - MASS STORE [ ]
key to return to the Save menu. The selected storage device is displayed in
return
box of the key label of the
STORE DEV [ ]
key to display the Data Save menu.
DATA
key to display the Data Contents Select menu.
SELECT CONTENTS
Analysis and Processing of Result
key.
cancel
key of the keyboard to save the file. An
[Enter]
Key operation
FLOPPY
MEMORY
FLASH MEMORY
key.
Selected storage device
Floppy disk drive
Volatile memory disk
Non-volatile memory disk (flash memory)
key or
done [´1]
is
STORE DEV [ ]
273