Agilent Technologies 4294A Operating Manual page 370

Key Definitions
Functions of hardkeys
Table B-6 ENTRY block
Hardkey
[Back Space] Moves the cursor one space back and deletes the character to the left of the
cursor. If you make a mistake in entering a value through the numeric keys, you
can use this key to correct your entry.
[0] to [9], [.], [-] (numeric Use these keys to enter each numeral that makes up your entry. Press a unit key
key) to put your entered value into effect.
[G/n][M/m][k/m][x1](unit After entering your desired value through numeric keys, press one of these unit
key) keys to suffix the value with the specific unit. The entered value does not take
effect until you press a unit key. Each unit key, except the [x1] key, represents
two different units, identified by their respective initial letters. Which unit to use
is automatically determined based on the selected parameter. Use the [x1] key to
enter a value that does not take a specific unit.
362
Function GPIB command
(N/A)
(N/A)
(N/A)
Appendix B