Agilent Technologies 4294A Operating Manual page 411

Table B-73 Level monitor (Level Mon) menu
Key operation: [Utility] - LEVEL MON [ ]
Softkey
OFF Turns off the marker level monitor function. Usual markers are displayed.
|
AC-V Displays the voltage value of the test signal at the marker position on the current
| active trace (A or B) in the upper right area of the screen. Before selecting this
function, you must turn on the monitor display of the test signal level with the
OSC LEVEL on OFF key in Table B-13, "Display (Display) menu (1/2)," on
page 366.
AC-I Displays the current value of the test signal at the marker position on the current
| active trace (A or B) in the upper right area of the screen. Before selecting this
function, you must turn on the monitor display of the test signal level with the
OSC LEVEL on OFF key in Table B-13, "Display (Display) menu (1/2)," on
page 366.
DC-V Displays the voltage value of the dc bias at the marker position on the current
| active trace (A or B) in the upper right area of the screen. Before selecting this
function, you must select VOLT (dc bias voltage value monitor) in Table B-16,
"Bias Monitor (Bias Monitor) menu," on page 367.
DC-I Displays the current of the dc bias at the marker position on the current active
trace (A or B) in the upper right area of the screen. Before selecting this function,
you must select CURRENT (dc bias current value monitor) in Table B-16, "Bias
Monitor (Bias Monitor) menu," on page 367.
return Returns to Table B-71, "Utility (Utility) menu," on page 402.
Appendix B
Softkeys displayed by pressing the [Utility] key
Function
Key Definitions
GPIB command
MKRMON OFF
MKRMON ACV
MKRMON ACI
MKRMON DCV
MKRMON DCI
(N/A)
403