Apply The Logarithmic Format To The Vertical Axis For |Z; Apply The Linear Format To The Vertical Axis For Q - Agilent Technologies 4294A Operating Manual

Learning Operation Basics
Carrying Out Measurement and Viewing Results
Figure 2-5 Measurement results displayed just after connecting the DUT

Apply the Logarithmic Format to the Vertical Axis for |Z|

Step 1. Make sure that Trace A is selected as the active trace (Trace A is active by default in the
preset state).
Step 2. Press the
Step 3. Press the

Apply the Linear Format to the Vertical Axis for q

Step 1. Press the
Step 2. Make sure that the graph's vertical axis is in the linear format with the
(this setting is selected by default in the preset state).
38
key to display the Display Format menu.
[Format]
key to make the graph's vertical axis logarithmic.
LOG
key to activate Trace B.
[B]
key selected
LIN
Chapter 2