Learning Operation Basics
Carrying Out Measurement and Viewing Results
Figure 2-7
Displaying Traces A and B in Parallel
NOTE
You do not need to check which trace is active when you split the screen because this
setting is applied to both Traces A and B.
Auto-scale the |Z| Trace
Step 1. Press the
Step 2. Press the
Step 3. Press the
Auto-scale the q Trace
Step 1. Press the
Step 2. Press the
40
key to activate Trace A.
[A]
key to display the Scale Reference menu.
[Scale Ref]
key to auto-scale the trace for |Z|.
AUTO SCALE
key to activate Trace B.
[B]
key to auto-scale the trace for q.
AUTO SCALE
Chapter 2