Putting The Agilent 4294A Into The Preset State (Presetting) - Agilent Technologies 4294A Operating Manual

Precision impedance analyzer

Hide thumbs Also See for 4294A:

Table of Contents

Setting Measurement Conditions

Putting the Agilent 4294A into the Preset State (Presetting)

Step 1. Press the

Executing presetting will put the Agilent 4294A into an initial state called the "preset

When turning on the power to the Agilent

, a power-on state file is loaded to restore

the setting stored in the file if it has been saved in the mass storage of the Agilent

We recommend that you to perform presetting by pressing the

key each time you

put the Agilent 4294A into a new setting, regardless of whether it is done immediately after

turning the power on.

Note that the adapter setting is not affected by initialization with the

key; once it is

set, it cannot be modified by pressing the

Show Quick Links

Table of Contents