Agilent Technologies 4294A Operating Manual page 167

Setting Up the Display of Measurement Results
Selecting the Measurement Parameters
NOTE
The Agilent 4294A preserves the graph axis formats, scale settings, data and memory trace
contents, and trace definitions for each parameter (for example, Ls) unless it is turned off
or reset to its preset state. This feature makes it easy to examine the DUT from various
perspectives by switching among a number of measurement parameters. For detailed
information on configuring the settings that control how the Agilent 4294A displays
measurement results, refer to the following sections:
• "Selecting the Graph Axis Format" on page 160
• "Auto-scaling the Trace" on page 164
• "Manual Scale Setting (for measurements other than COMPLEX Z-Y)" on page 166
• "Manually Scaling the Active Trace for a COMPLEX Z-Y Graph" on page 172
• "Selecting the Target Trace Type (Data or Memory)" on page 177
• "Enabling or Disabling Coupled Scaling Mode" on page 178
• "Trace-based Comparison and Calculation" on page 179
You can set each measurement parameter without specifying the active trace or checking
its current state.
Chapter 7 159