Agilent Technologies 4294A Operating Manual page 67

Fixture compensation status
CMP
Cmp
(blank)
Blank cells in the table indicate that the feature is off.
NOTE The user correction and fixture compensation features share the same correction point
settings. You cannot set correction points specific to a single feature.
Averaging status
Avg
(blank)
Averaging counter
(Positive integer)
Data trace definition
D–M
D/M
D%M
–O
(blank)
NOTE If "–O" appears below "D–M" or "D%M," the data trace represents the result of
performing both operations on the measurement data.
Chapter 3
Fixture Compensation
feature
ON
ON
Indicates that the sweep-to-sweep averaging feature is on.
Indicates that the sweep-to-sweep averaging feature is off.
When the sweep-to-sweep averaging feature is on, this counter
indicates how many times the current trace has been subjected to
sweep-to-sweep averaging. After you have started sweep-to-sweep
averaging, the counter shows "1" upon the 1st sweep cycle, "2" upon
the 2nd cycle, and so on until it reaches the maximum number of
averaging cycles. To view a trace subjected to your specified number
of averaging cycles, you must wait for the instrument to repeat the
sweep cycles until the counter reaches that number.
Indicates that the currently displayed data trace represents the result of
subtracting the memory trace data from the measurement data.
Indicates that the currently displayed data trace represents the result of
dividing the measurement data by the memory trace data.
Indicates that the currently displayed data trace represents the result of
DATA MEM
the following operation:
----------------------------------- -
measurement data and MEM is the memory trace data).
Indicates that the currently displayed data trace represents the result of
subtracting the offset value from the measurement data.
Indicates that the currently displayed data trace shows the exact
measurement data.
Front/Rear Panel and LCD Display
Items Displayed on the LCD
Correction point setting
Fixed
User-defined
(Unknown)
–
[%] (where DATA is the
´
100
MEM
59