Agilent Technologies 4294A Operating Manual page 401

Table B-59 Sub marker configuration (Set SMKR) menu
Key operation: [Marker] - SUB MKR
Softkey
6: OFF For sub marker 6, executes the same operation as the above key for sub marker 1.
7: OFF For sub marker 7, executes the same operation as the above key for sub marker 1.
return Returns to Table B-58, "Marker (Marker) menu," on page 392.
Table B-60 Sub marker deletion (Clear SMKR) menu
Key operation: [Marker] - CLEAR SUB MKR
Softkey
1: OFF Turns off sub marker 1 in the on status. If it is in the off status (1: OFF), nothing
happens.
2: OFF For sub marker 2, executes the same operation as the above key for sub marker 1.
3: OFF For sub marker 3, executes the same operation as the above key for sub marker 1.
4: OFF For sub marker 4, executes the same operation as the above key for sub marker 1.
5: OFF For sub marker 5, executes the same operation as the above key for sub marker 1.
6: OFF For sub marker 6, executes the same operation as the above key for sub marker 1.
7: OFF For sub marker 7, executes the same operation as the above key for sub marker 1.
return Returns to Table B-58, "Marker (Marker) menu," on page 392.
Table B-61 Delta marker (Delta MKR) menu
Key operation: [Marker] - DMODE MENU
Softkey
DMKR Displays and moves the D marker to the current position of the main marker.
This D marker, when the trace is updated and changed, moves together with the
|
trace so that it is always located on the trace (only the sweep parameter value is
fixed). If this D marker is selected, "DMkr" is displayed in the upper right area of
the screen.
FIXED DMKR Displays and moves the fixed D marker to the current position of the main
marker. This fixed D marker is fixed on the screen and does not move, even when
|
the trace is updated and changed. If this fixed D marker mode is selected, "FxdD"
is displayed in the upper right area of the screen.
TRACKING DMKR Displays the tracking D marker at the current position of the main marker. This
| tracking D marker always moves together with the main marker. Moving the
main marker causes the tracking D marker to move also. On the other hand,
moving the tracking D marker using the DMKR STIMULUS key causes the main
marker to also move. If the tracking D marker is selected, "TrkD" is displayed in
the upper right area of the screen.
DMKR OFF Turns off the selected D marker (D marker, fixed D marker, or tracking D marker)
and deletes it from the screen.
Appendix B
Softkeys displayed by pressing the [Marker] key
Function
Function
Function
Key Definitions
GPIB command
SMKR6 ON
SMKR7 ON
(N/A)
GPIB command
SMKR1 OFF
SMKR2 OFF
SMKR3 OFF
SMKR4 OFF
SMKR5 OFF
SMKR6 OFF
SMKR7 OFF
(N/A)
GPIB command
DMKR ON
DMKR FIX
DMKR TRAC
DMKR OFF
393