Agilent Technologies 4294A Operating Manual page 239

Figure 8-13 Search the left-hand peak after Figure 8-11 using the
Step 5. Read the value displayed in the marker sweep parameter value area on the screen.
NOTE When the
for the trace when the key is pressed. If the search tracking function is on, search is
executed every time a sweep is completed.For details about the search tracking function,
refer to "Automatically performing search for each sweep (search tracking)" on page 235.
Chapter 8
, , or
MAX MIN TARGET PEAK
Analysis and Processing of Result
Search the maximum/minimum peak
NEXT PEAK LEFT
key is used for searching, one search is carried out
key
231