Agilent Technologies 4294A Operating Manual page 430

Key Definitions
Softkeys displayed by pressing the [Save] key
Table B-106 Filename entry (File Name) menu
Key operation: [Save] - STATE
[Save] - DATA - BINARY/ASCII
[Save] - GRAPHICS
[Save] - FILE UTILITIES - CREATE DIRECTORY
Softkey
done Using the entered string as the filename, executes storing states, data, or
graphics. When creating a directory, a directory having the entered string is
created. After execution, returns to the higher-level menu (Table B-105, "Save
(Save) menu," on page 421, Table B-107, "Data save (Save Data) menu," on
page 422, or Table B-110, "File utility (File Utility) menu," on page 423).
cancel Cancels the storage or creation of a directory and returns to the higher-level
menu (Table B-105, "Save (Save) menu," on page 421, Table B-107, "Data save
(Save Data) menu," on page 422, or Table B-110, "File utility (File Utility)
menu," on page 423).
Table B-107 Data save (Save Data) menu
Key operation: [Save] - DATA
Softkey
BINARY ä
Selects storage of measured data in binary format and displays Table B-106,
"Filename entry (File Name) menu," on page 421.
ASCII ä
Selects storage of measured data in ASCII format and displays Table B-106,
"Filename entry (File Name) menu," on page 421.
SELECT CONTENTS ä
Displays Table B-108, "Data save item selection (Save Contents) menu," on
page 422.
STORE DEV [ ] ä
Displays Table B-81, "Mass storage (Store Device) menu," on page 408. In [ ]
of the softkey label, the currently selected mass storage is displayed (flexible
disk drive: [FLOPPY], volatile memory disk: [MEMORY], or nonvolatile
memory disk (flash memory): [FLASH]).
return Returns to Table B-105, "Save (Save) menu," on page 421.
Table B-108 Data save item selection (Save Contents) menu
Key operation: [Save] - DATA - SELECT CONTENTS
Softkey
CAL on OFF Toggles on (stores) and off (does not store) storage of the calibration coefficient
array.
DATA on OFF Toggles on (stores) and off (does not store) storage of the data array.
MEMORY on OFF Toggles on (stores) and off (does not store) storage of the memory array.
TRACE DATA ON off Toggles on (stores) and off (does not store) storage of the trace array.
TRACE MEM ON off Toggles on (stores) and off (does not store) storage of the memory trace array.
return Returns to Table B-107, "Data save (Save Data) menu," on page 422.
422
Function
Function
Function
GPIB command
(N/A)
(N/A)
GPIB command
SAVDDAT <string>
SAVDASC <string>
(N/A)
(N/A)
(N/A)
GPIB command
SAVCAL {ON|OFF}
SAVDAT {ON|OFF}
SAVMEM {ON|OFF}
SAVDTRC {ON|OFF}
SAVMTRC {ON|OFF}
(N/A)
Appendix B