Setting/Checking The Time - Agilent Technologies 4294A Operating Manual

Setting/Using Control and Management Functions
Setting/Checking the Internal Clock
Step 7. Press the
number indicating the currently set day is displayed. Below it, the currently set date (year,
month, and day) is displayed in a smaller size as in Step 5.
Step 8. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the "day."
•
•
•
"Day" can be set to an integer ranging from 1 through 31.
Step 9. Press the
4-digit number indicating the currently set year is displayed. Below it, the currently set date
(year, month, and day) is displayed in a smaller size as in Step 5.
Step 10. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the "year" as a 4-digit number.
•
•
•
"Year" can be set to an integer ranging from 1900 through 2099.
Step 11. Press the
4294A and to return to the Internal Clock menu.
NOTE
When the
actual date. If invalid, the "CAUTION: INVALID DATE" message appears. In this case,
set the correct date.
When you want to cancel the setting of the date, press the
key. The previous date setting remains without changes.

Setting/Checking the Time

Step 1. Press the
Step 2. Press the
Step 3. Press the
Step 4. Press the
number indicating the currently set hour is displayed. Below it, the currently set time
(hour:minute:second) is displayed in a smaller size.
NOTE
When you press the
appears in the set parameter value field. Therefore, you do not need to press the
here. You use the
302
key. In the set parameter value field in the upper left area of the screen, a
DAY
Enter the desired value with the numeric keys (
key.
Turn the rotary knob ( m m m m ) until the desired value is set.
Press the step keys ([­][¯]) to set the desired value.
key. In the set parameter value field in the upper left area of the screen, a
YEAR
Enter the desired value with the numeric keys (
key.
Turn the rotary knob ( m m m m ) until the desired value is set.
Press the step keys ([­][¯]) to set the desired value.
key to save the month/day/year data set in Steps 5 through 10 in the Agilent
done
key is pressed, the entered value is checked for whether it is valid as an
done
key to display the System menu.
[System]
key to display the Internal Clock menu.
CLOCK
key to display the Time Configuration menu.
TIME
key. In the set parameter value field in the upper left area of the screen, a
HOUR
key in Step 3, the same display as when you press the
TIME
key when you want to change the "hour" setting after executing
HOUR
to ) and then press the
[0] [9]
to ) and then press the
[0] [9]
key instead of the
cancel
unit
[´1]
unit
[´1]
done
key
HOUR
key
HOUR
Chapter 9