Calibration
A. Calibration When Using Direct Connection Type Test Fixture
•
•
•
•
Step 1. Make sure that the adapter selection is set to "No Adapter (
See "Adapter Setting" on page 67 for adapter selection.
Step 2. Perform the fixture compensation in accordance with "Fixture Compensation" on page
151.
NOTE
When you use a direct connection type test fixture, neither user calibration nor port
extension compensation is required for measurement (they cannot be performed).
134
16089B Kelvin Clip Lead
16089C Kelvin Clip Lead
16089D Alligator Clip Lead
16089E Kelvin Clip Lead
)."
NONE
Chapter 6