Agilent Technologies 4294A Operating Manual page 392

Key Definitions
Softkeys displayed by pressing the [Sweep] key
Table B-44 Sweep parameter (Sweep Param) menu
Key operation: [Sweep] - PARAMETER [ ]
Softkey
return Returns to Table B-43, "Sweep (Sweep) menu," on page 383.
Table B-45 Sweep time (Sweep Time) menu
Key operation: [Sweep] - TIME
Softkey
SWEEP TIME Sets sweep time.
POINT DELAY Sets the measurement start delay time for each measurement point.
SWEEP DELAY Sets the sweep start delay time for each sweep.
return Returns to Table B-43, "Sweep (Sweep) menu," on page 383.
Table B-46 Sweep type (Sweep Type) menu
Key operation: [Sweep] - TYPE [ ]
Softkey
LINEAR Selects the linear sweep as the sweep type. The linear sweep linearly allocates
| sweep points (measurement points) and performs sweeps within the sweep range
specified by start and stop (or center and span).
LOG Selects the log (logarithmic) sweep as the sweep type. The log sweep
| logarithmically allocates sweep points (measurement points) and performs
sweeps within the sweep range specified by start and stop (or center and span).
LIST Selects the list sweep as the sweep type. Before selecting the list sweep, you
must create a list sweep table with the EDIT LIST key in Table B-47, "List
sweep (List Sweep) menu," on page 384.
return Returns to Table B-43, "Sweep (Sweep) menu," on page 383.
Table B-47 List sweep (List Sweep) menu
Key operation: [Sweep] - EDIT LIST
Softkey
SEGMENT If there is a list sweep table, specify the segment number you want to edit. The
currently specified segment is indicated by the pointer (>) in the SEG column at
the leftmost area of the list sweep table.
EDIT ä
Displays Table B-48, "Segment edit (Edit Segment) menu (1/3)," on page 385.
DELETE Executes the deletion of the segment specified by the pointer (>).
ADD ä
Displays Table B-48, "Segment edit (Edit Segment) menu (1/3)," on page 385.
384
Function
Function
Function
Function
GPIB command
(N/A)
GPIB command
SWET <value>
PDELT <value>
SDELT <value>
(N/A)
GPIB command
SWPT LIN
SWPT LOG
SWPT LIST
(N/A)
GPIB command
SEGM <value>
SEDI
SDEL
SADD
Appendix B