List Of Fixed Calibration/Compensation Frequency Points - Agilent Technologies 4294A Operating Manual

Calibration
Selecting Calibration/Compensation Data Points

List of fixed calibration/compensation frequency points

When the fixed frequency points for user calibration and fixture compensation are selected
(softkey label:
frequency points listed in Table 6-2.
Table 6-2 Fixed Calibration/Compensation Points (100 points, in Hz)
40, 45, 55, 70, 91,
130, 195, 320, 600,
1k, 2.1k, 4k, 9.5k,
21k, 40k, 96k,
130k, 170k, 230k, 275k, 320k, 400k, 510k, 630k, 750k, 800k, 900k,
1M, 1.1M, 1.1M, 1.6M, 1.9M, 2.3M, 2.6M, 3M, 3M, 3.4M, 3.8M, 4.2M, 4.6M, 5M, 5M,
6M, 7M, 8.5M,
10M, 11.5M, 13M, 14M, 15M, 15M, 16M, 18M, 20M, 20M, 22M, 24M, 26M, 28M, 30M,
32M, 34M, 36M, 38M, 40M, 42M, 44M, 46M, 48M, 50M, 52M, 54M, 56M, 58M, 60M,
62M, 64M, 66M, 68M, 70M, 72M, 74M, 76M, 78M, 79.9M, 82M, 84M, 86M, 88M, 90M,
92M, 94M, 96M, 98M,
100M, 102M, 104M, 106M, 108M, 110M
NOTE The same frequency points are shown in different positions in Table 6-2 because
calibration/compensation is performed at some frequency points depending on the different
internal setups used with the Agilent 4294A.
156
), calibration/compensation is performed at the
COMP POINT [FIXED]
Chapter 6