Agilent Technologies 4294A Operating Manual page 311
Precision impedance analyzer
Hide thumbs
Also See for 4294A:
- Programming manual (518 pages) ,
- Operation manual (10 pages) ,
- Configuration manual (8 pages)
Table of Contents
Advertisement
Steps 6 through 9.
Step 5. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the "hour."
•
Enter the desired value with the numeric keys (
key.
•
Turn the rotary knob (
•
Press the step keys ([][¯]) to set the desired value.
"Hour" can be set to an integer ranging from 0 through 23.
Step 6. Press the
number indicating the currently set minute is displayed. Below it, the currently set time
(hour:minute:second) is displayed in a smaller size as in Step 4.
Step 7. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the "minute."
•
Enter the desired value with the numeric keys (
key.
•
Turn the rotary knob (
•
Press the step keys ([][¯]) to set the desired value.
"Minute" can be set to an integer ranging from 0 through 59.
Step 8. Press the
a number indicating the currently set second is displayed. Below it, the currently set time
(hour:minute:second) is displayed in a smaller size as in Step 4.
Step 9. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the "second."
•
Enter the desired value with the numeric keys (
key.
•
Turn the rotary knob (
•
Press the step keys ([][¯]) to set the desired value.
"Second" can be set to an integer ranging from 0 through 59.
Step 10. Press the
9 in the Agilent 4294A and to return to the Internal Clock menu.
NOTE
When you want to cancel the setting of the time, press the
key. The previous time setting remains without changes.
Chapter 9
Setting/Using Control and Management Functions
m m m m
) until the desired value is set.
key. In the set parameter value field in the upper left area of the screen, a
MINUTE
m m m m
) until the desired value is set.
key. In the set parameter value field in the upper left area of the screen,
SECOND
) until the desired value is set.
m m m m
key to save the "hour," "minute," and "second" data set in Steps 4 through
done
Setting/Checking the Internal Clock
to
) and then press the
[0]
[9]
to
) and then press the
[0]
[9]
to
) and then press the
[0]
[9]
key instead of the
cancel
unit
[´1]
unit
[´1]
unit
[´1]
done
303
- Quick Links:
- Learning Operation Basics
Hide quick links:
Advertisement
Table of Contents
