Agilent Technologies 4294A Operating Manual page 431

Table B-109 Power-on configuration save (Save config?) menu
Key operation: [Save] - POWER ON CONFIG
Softkey
yes Stores the current configuration of the Agilent 4294A as the configuration at
power-on (power-on configuration). Also, returns to Table B-105, "Save (Save)
menu," on page 421.
cancel Cancels the storage of the power-on configuration and returns to Table B-105,
"Save (Save) menu," on page 421.
Table B-110 File utility (File Utility) menu
Key operation: [Save] - FILE UTILITIES
Softkey
PURGE FILE ä Searches the mass storage specified with the STORE DEV [ ] key for files other
than program files and directories and displays Table B-111, "File selection
(Select File) menu," on page 424, including the filename list.
CREATE DIRECTORY Displays Table B-106, "Filename entry (File Name) menu," on page 421.
ä
CHANGE DIRECTORY Searches the mass storage specified with the STORE DEV [ ] key for directories
ä
and displays Table B-111, "File selection (Select File) menu," on page 424,
including the filename list.
COPY FILE ä
Searches the mass storage specified with the STORE DEV [ ] key for files other
than program files and directories and displays Table B-111, "File selection
(Select File) menu," on page 424, including the filename list.
FORMAT ä Displays Table B-113, "Format confirmation (Format Media?) menu," on page
425.
STORE DEV [ ] ä
Displays Table B-81, "Mass storage (Store Device) menu," on page 408. In [ ]
of the softkey label, the currently selected mass storage is displayed (flexible
disk drive: [FLOPPY], volatile memory disk: [MEMORY], or nonvolatile
memory disk (flash memory): [FLASH]).
return Returns to Table B-105, "Save (Save) menu," on page 421.
Appendix B
Softkeys displayed by pressing the [Save] key
Function
Function
Key Definitions
GPIB command
(N/A)
(N/A)
GPIB command
PURG <string>
CRED <string>
CHAD <string>
FILC
<srcFile>,<srcDevType>
,<dstFile>,<dstDevType
>
INID
(N/A)
(N/A)
423