Agilent Technologies 4294A Operating Manual page 184

Setting Up the Display of Measurement Results
Manually Scaling the Active Trace for a COMPLEX Z-Y Graph
Figure 7-15 Setting the full scale value for a polar chart (for measuring complex impedance)
NOTE
Alternatively, when you have the main marker displayed on the trace, you can press the
MKR ® REFERENCE
the origin) as the full scale value. Thus, you can change the trace scale by placing the full
scale circle at the position indicated by the main marker.
176
key to use the value at the marker position (i.e., the distance from
Chapter 7