Agilent Technologies 4294A Operating Manual page 461

Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Table D-1 Initial settings, settings that can be saved/recalled, settings that can be backed up
Function
Printer Color
Resolution
Top margin
Left margin
Landscape printing
Formfeed
Softkey label printing
Time stamp
Table format when list sweep table is printed
Table format when limit line table is printed
Beep On/Off setting of the beep to notify the completion of
operation
On/Off setting of the beep when the limit test result is
FAIL
On/Off setting of the beep when an error occurred or
when an invalid key is pressed
Others Date display format of internal clock
Front panel key and rotary knob lock
(GPIB command only)
IBASIC mass storage device selection
Data transfer format (GPIB command only)
Appendix D
Initial settings
Setting
(factory settings)
Black and White
Upper limit value /
Lower limit value
Floppy Disk Drive No effect
[Preset] *RST
¬
No effect
75 DPI No effect ¬
1 inch No effect ¬
¬
1 inch No effect
¬
Off No effect
¬
On No effect
¬
Off No effect
Off No effect ¬
Start value /
No effect ¬
Stop value
¬
No effect
¬
On No effect
Off ¬ ¬
¬
Off No effect
¬
MM/DD/YY No effect
¬
Off No effect
¬
¬ ¬
ASCII
Initial Settings
Backed Up
Save/
Backup
Recall
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
453