Copying A File - Agilent Technologies 4294A Operating Manual

NOTE
You can perform Steps 10 and 11 with the external keyboard connected to the rear panel.
After entering a directory name, press the
of the directory.

Copying a File

Follow these steps to copy (duplicate) a file stored in any storage device of the Agilent
4294A.
Step 1. If a copy source file is on a floppy disk or if you create a copy destination file on a floppy
disk, insert this floppy disk into the floppy disk drive.
Step 2. Press the
Step 3. Press the
Step 4. Press the
Step 5. In [ ] of the
displayed.
Softkey label
STORE DEV [FLOPPY]
STORE DEV [MEMORY]
STORE DEV [FLASH]
If the copy source file is on the currently selected storage device, proceed to Step 7.
If the copy source file is not on the currently selected storage device, press the
STORE DEV [ ]
Step 6. Select the storage device where the copy source file is stored.
Storage device
Floppy disk drive
Volatile memory disk
Nonvolatile memory disk (flash memory)
Pressing the key returns the display to the File Selection menu.
Step 7. When a storage device is selected, the current directory (the current location in the
hierarchical tree structure used to store files) at that time and the amount of available space
on the storage device are displayed in the upper left area of the screen. No name is assigned
to the highest level directory, called the root directory, and only "\" is displayed. The four
softkey labels at the top of the File Selection menu show the list of files and directories
other than program files under the current directory on the storage device selected with the
STORE DEV [ ]
or directories, the first four are displayed.
If the copy source file is not displayed as a softkey label, follow these steps to display the
Chapter 9
Setting/Using Control and Management Functions
key to display the Save menu.
[Save]
key to display the File Utilities menu.
FILE UTILITIES
key to display the File Selection menu.
COPY FILE
key's softkey label, the currently selected storage device is
STORE DEV [ ]
key to display the Mass Storage menu.
key. This list is made in alphabetical order. If there are more than four files
key on the keyboard to execute creation
[Enter]
Selected storage device
Floppy disk drive
Volatile memory disk
Nonvolatile memory disk (flash memory)
Key operation
FLOPPY
MEMORY
FLASH MEMORY
Managing Files
307