Setting the Internal Clock
The E5070A/E5071A has the built-in clock that keeps track of the date and time. This
clock is used for the following functions.
•
To display the current date and time in the instrument status bar at the lower part of the
screen
•
To write date and time information when saving internal data or a VBA program
Setting the Date and Time
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
The dialog box in Figure 12-1 appears.
Figure 12-1
Date/Time Properties Dialog Box ("Date & Time" Tab)
Step 5. Set the date in the
Step 6. Press the
The dialog box in Figure 12-2 appears.
Chapter 12
Setting and Using the Control and Management Functions
.
.
Misc Setup
.
Clock Setup
.
Set Date and Time
area, and set the time in the
Date
tab.
Time Zone
Setting the Internal Clock
area.
Time
249