Agilent Technologies 4294A Operating Manual page 424

Precision impedance analyzer
Hide thumbs Also See for 4294A:
Table of Contents

Advertisement

Key Definitions
Softkeys displayed by pressing the [Local] key
Table B-95
LAN address (LAN Address) menu
Key operation:
[Local] - IP ADDRESS
[Local] - GATEWAY ADDRESS
[Local] - SUBNET MASK
Softkey
cancel
Cancels setting the IP address, gateway address, or subnet address specified with
the above keys and returns to Table B-94, "Local (Local) menu," on page 415.
Table B-96
Gateway address setting (LAN Address) menu
Key operation:
[Local] - GATEWAY ADDRESS
Softkey
1st
Sets the 1st part of the gateway address separated by periods (.).
2nd
Sets the 2nd part of the gateway address separated by periods (.).
3rd
Sets the 3rd part of the gateway address separated by periods (.).
4th
Sets the 4th part of the gateway address separated by periods (.).
done
Stores the gateway address setting specified with the above keys and returns to
Table B-94, "Local (Local) menu," on page 415. To allow this setting to take
effect after pressing this key, turn the Agilent 4294A off and then on again.
cancel
Cancels the gateway address setting specified with the above keys and returns to
Table B-94, "Local (Local) menu," on page 415.
Table B-97
Subnet mask setting (LAN Address) menu
Key operation:
[Local]-SUBNET MASK
Softkey
1st
Sets the 1st part of the subnet mask separated by periods (.).
2nd
Sets the 2nd part of the subnet mask separated by periods (.).
3rd
Sets the 3rd part of the subnet mask separated by periods (.).
4th
Sets the 4th part of the subnet mask separated by periods (.).
done
Stores the subnet mask setting specified with the above keys and returns to Table
B-94, "Local (Local) menu," on page 415. To allow this setting to take effect
after pressing this key, turn the Agilent 4294A off and then on again.
cancel
Cancels the subnet mask setting specified with the above keys and returns to
Table B-94, "Local (Local) menu," on page 415.
416
Function
Function
Function
GPIB command
(N/A)
GPIB command
ADDRGW <1st
addr>,<2nd addr>,<3rd
addr>,<4th addr>
(N/A)
(N/A)
GPIB command
SUBNET <1st
addr>,<2nd addr>,<3rd
addr>,<4th addr>
(N/A)
(N/A)
Appendix B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents