Agilent Technologies 4294A Operating Manual page 306

Analysis and Processing of Result
Print the measurement results and internal data with a printer
Figure 8-34 List of measurement conditions
Step 4. While checking the print contents displayed on the screen, select the time stamp and
display/print form.
Scroll the screen to check print contents.
Display the next page.
Display the previous page.
Set the display/print format
Time stamp function during printing (printing
of time and date at the start of printing)
Display/print mode in the sweep range of list
sweep table segment
Display/print mode in the limit range of limit
line table
Step 5. Press the
NOTE To suspend printing, press the
Press the
normal screen.
298
1
2
1. Only during printing of list sweep table
2. Only during printing of limit line table
key to start printing.
START
ABORT
RESTORE DISPLAY
Key operation
NEXT PAGE
PREV PAGE
Softkey label
TIME ON off
TIME on OFF
DISP MODE [STRT-STP]
DISP MODE [CTR-SPAN]
DISP MODE [UPR-LWR]
DISP MODE [VAL-DLT]
differential values)
key.
key to restore the measurement/setting list back to the
(ON)
(OFF)
(Start/stop)
(Center/span)
(Upper/lower values)
(Middle and
Chapter 8