Agilent Technologies 4294A Operating Manual page 317

NOTE
Each of the following menus allows you to independently select a storage device.
However, for each type of device, there is only a single device used commonly for all of
the menu settings.
• The Mass Storage menu displayed by the
• The Copy Destination Device menu displayed by the
• The IBASIC Mass Storage menu displayed by the key operation:
more 1/3 - MASS STORE Åm ]
The IBASIC Mass Storage menu manages the setting to be used for the storage devices of
the Agilent 4294A through the HP Instrument Basic functions.
Pressing the key returns the display to the File Selection menu.
Step 11. When a storage device is selected, the current directory (the current location in the
hierarchical tree structure used to store files) at that time and the amount of available space
on the storage device are displayed on the upper left area of the screen. No name is
assigned to the highest level directory, called the root directory, and only "\" is displayed.
The current directory shown here is that of the storage device previously specified.
If you do not change the copy destination filename to store, proceed to Step 12.
If you want to change the filename, use the following keys to change it in the string input
line.
Key
Step keys ([­][¯])
Rotary knob (m m m m )
SELECT LETTER
Numeric keys (
SPACE
BACK SPACE
CLEAR NAME
NOTE You do not have to add an extension to the filename.
Step 12. When you have finished entering the copy destination filename into the string input line,
press the
either case, the screen returns to the File Utilities menu.
Chapter 9
Setting/Using Control and Management Functions
.
or
[G/n]
through , , )
[0] [9] [.] [-]
or
[Back Space]
or key to execute the save. To cancel the save, press the
done [´1]
Managing Files
key.
STORE DEV [ ]
key.
DEST DEV [ ]
[System] - IBASIC -
Function
Scrolls up or down the list of available
characters displayed below the text entry line.
Horizontally moves the cursor (­) located
below the displayed character list.
At the cursor (_) of the string input line, enters
the character specified with the cursor (­)
below the character list.
Enters the numerical value at the position
cursor (_) of the character string input line.
Enters a space at the position cursor (_) of the
character string input line.
Moves the cursor (_) of the character string
input line one character to the left and erases
the character in that position.
Erases everything entered in the character
string input line.
key. In
cancel
309