Setting The Internal Clock; Procedure For Setting The Internal Clock - Agilent Technologies E4991A Operation Manual

Setting the Internal Clock

The E4991A has a built-in clock for the date and time. This internal clock is used for
recording the date and time of when internal data or a VBA program is saved as a file.

Procedure for setting the internal clock

NOTE
Use the mouse or keyboard for the following operation.
Step 1. Exiting the E4991A system program.
a. Click
The Enter Password to exit dialog box (Figure 9-4) opens.
Figure 9-4 Enter Password to exit dialog box
b. Click the
external keyboard to enter the password
c. Click the
Step 2. Setting the date and time.
a. Click the
Control Panel
(Figure 9-6).
Figure 9-5 Select Control Panel from the start menu.
Chapter 9
Setup and Use of Control/Management Functions
in the menu bar.
System - Exit
button and use the displayed character entry dialog box or use an
Keyboard...
button to exit the E4991A system.
OK
button in the lower-left corner of the screen and select
Start
(Figure 9-5). This operation will open the Control Panel window
Setting the Internal Clock
in the box.
e4991a Password
Settings -
197