Resetting All Items To Factory Default Colors - Agilent Technologies 4294A Operating Manual

Setting Up the Display of Measurement Results
Customizing Intensity and Color Settings for Screen Display
the saturation factor (%) relative to the pure color.
•
•
•
NOTE To reset the color of an item to the factory default setting, display the Item Color menu for
that item and then press the
The factory setting (the setting when the RESET COLOR key is pressed) of the graphic
drawing pens is: pen 1: white, pen 2: red, pen 3: yellow, pen 4: green, pen 5: cyan, and pen
6: blue.
The brightness of the softkey labels affects their readability, thus the Agilent 4294A's
operability. Take care not to set the softkey labels to an excessively low brightness.

Resetting All Items to Factory Default Colors

You cannot reset the colors of text and graphics by simply pressing the
turning the power off and back on. To reset all screen items to the factory default colors,
follow these steps:
Step 1. Press the
Step 2. Press the
the Display menu.
Step 3. Press the
menu.
Step 4. Press the
items to their factory default colors.
NOTE
Pressing the
intensity factors to the factory default settings. To reset the foreground and background
intensity factors to the factory default settings, you must manually enter the default values
(100% and 0%, respectively) by following the procedures described in "Setting the
Foreground Intensity" on page 207 and "Adjusting the Background Intensity" on page
207.
210
Enter the desired value with the numeric keys (
Turn the rotary knob ( ) until the desired value is set.
m m m m
Press the step keys ([­][¯]) to set the desired value.
RESET COLOR
key to display the first page of the Display menu.
[Display]
key (the softkey displayed at the bottom) to move to the second page of
more 1/2
key (the 4th softkey from the top) to display the Modify Color
MODIFY COLOR
DEFAULT COLORS
DEFAULT COLORS
to
[0]
key.
key (the 3rd softkey from the bottom) to reset all screen
key does not reset the foreground and background
) and then press the
[9] [´1]
key or
[Preset]
Chapter 7
key.