Enable Web Https - Extreme Networks ExtremeWare Command Reference Manual

enable web https

enable web https
enable web https
Description
Enables secure HTTP access (HTTPS) to the switch on the default HTTPS port (443).
NOTE
this command is available only on the Alpine 3800 and Summit 300 series switches.
Syntax Description
This command has no parameters or variables.
Default
Enabled
Usage Guidelines
Use this command to allow users to connect using a more secure HTTPS connection.
Example
The following command enables HTTPS on the default port:
enable web https
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e; it was added to
the "i" series of switches in ExtremeWare 7.3.0.
Platform Availability
This command is available on Summit 300 and Alpine 3800 series only.
ExtremeWare 7.5 Command Reference Guide 1019