Fig. 1-2 Control Panel - Canon NP-70 Service Manual

NP•70
1-3
n
~o ~
~ ~~.~. . o 00 0
.
°
,~.R. o®
,~.xY o~ ~F~KKE.~~
s
~_
Z.
O
Ready Lamp:
Copy Button:
Copy Dial:
Dial Index Mark:
Exposure Dial:
Stop Button:
Paper Feed Check Lamp:
Paper Supply Lamp:
Developer Supply Lamp:
Starting Position Mark:
Fig. 1-2 Control Panel
Flashes on and off for some time after main power is switched on.
Normal copies can be obtained even when this lamp is flashing on
and off; however, do not immediately touch copies obtained under
this condition because toner on copy paper will not be sufficiently
dry.
Press for obtaining copies.
Set the number of copies required to index mark.
Numbers on copy dial are set to this index mark.
Adjusts image density.
Press to stop copy operations during continuous copying.
Lights up when paper is not properly fed.
Lights up when paper inside the cassette has been depleted or when
the cassette is not properly set inside the copier.
Lights up when the supply of Premix developer has been depleted.
Set the mark on the copyboard to this mark when starting copying
operations.
© CANON ANC.
Second Printing,lune, 1974