Control Panel And Touch Panel Display - Canon imageRUNNER Advance 6275 Basic Operation Gude

Control Panel and Touch Panel Display

This section provides you with the names and functions of all the parts of the control panel and touch panel display.
20
19
18
17 16
1
Energy Saver key
Press to set or cancel the Energy Saver mode/Sleep mode. Lights when
the machine enters the Energy Saver mode/Sleep mode.
2
USB Port
Use the USB port to connect a USB device.
3
Settings/Registration key
Press to specify settings/registration.
4
Counter Check key
Press to display the copy and print count totals on the touch panel
display.
5
Clear key
Press to clear entered values or characters.
15 14 13
6
Stop key
Press to stop a job in progress, such as a scan, copy, or fax (scanning
only) job.
7
Start key
Press to start an operation.
8
Edit Pen
Use when operating the touch panel display, such as to enter
characters. If you lose the edit pen, contact your local authorized
Canon dealer. Do not use an object with a sharp end on the control
panel, such as a pencil or ballpoint pen, in place of the edit pen.
9
Main Power Indicator
Lights when the main power is turned ON.
1
12 11 10 9
2
3
4
5
6
7
8
17