Show Boot - Cisco MDS 9124 - Fabric Switch Reference

show boot

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show boot
To display the boot variables or modules, use the show boot command.
Syntax Description
module
slot
variable-name
sup-1
sup-2
variables
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.2(2)
Usage Guidelines
None.
Examples The following example displays the current contents of the boot variable.
switch# show boot
kickstart variable = bootflash:/kickstart-image
system variable = bootflash:/system-image
Module 2
asm-sfn variable = bootflash:/asm-image
The following example displays the images on the specified module.
switch# show boot module
Module 2
asm-sfn variable = bootflash:/asm-image
The following example displays a list of all boot variables.
switch# show boot variables
List of boot variables are:
Cisco MDS 9000 Family Command Reference
22-12
show boot [module [slot | variable-name] | sup-1 | sup-2 | variables]
Displays the boot variables for modules.
Specifies a module by the slot number.
Specifies the variable. Maximum length is 80 characters.
Displays the upper sup configuration.
Displays the lower sup configuration.
Displays the list of boot variables.
Modification
This command was introduced.
asm-sfn
system
kickstart
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x